OMEGA SEPARATIONS, based in Belgium (Antwerp area), is specialized in the design and the fabrication of internals used in gas-liquid separation and liquid-liquid separation.


Our internals are mist eliminators like wire mesh, mesh pad, Demister, knitted mesh, vane-pack, vane type inlet device, liquid distribution baffle, plate pack, coalescer pad.


From Belgium, we offer a complete customer service: engineering service (process & mechanical design, drawings,…), commercial service, production and shipping.


For rush delivery, we are able to fabricate Wire Mesh Pad in a couple of days.


We are certified NBN EN ISO 9001:2015

OMEGA SEPARATIONS

OUR PRODUCTS

Wire Mesh Mist Eliminators

(mesh pad, Demister, knitted mesh)

Wire Mesh Mist Eliminators are internals used in gas-liquid separation. 


They are made from knitted wire with specific characteristics in order to optimize the efficiency, the pressure drop and dimensions.


They are available in almost any size or shape and can be manufactured in a broad range of metals or plastics or both (co-knitted).

Benefits

●  High collection efficiency

●  Low installed cost

●  Low pressure drop

●  Fast delivery and service

Vane Pack Mist Eliminators

Vane Pack Mist Eliminators are internals used in gas-liquid separation and sometimes as pre-separators when solids or sticky and viscous liquids are present in the flow. They are assembled as banks of parallel van profiles.


They are available in a wide range of Vane Packs depending on the direction of gas flow and the complexity of the vane profiles.

Benefits

●  Suitable for both vertical and horizontal gas flow

●  Good collection efficiency in low pressure drop and vacuum applications

●  Suitable for higher liquid and gas loads

●  Suitable for applications with a significant risk of fouling and/or plugging.

Vane Type Inlet Devices

Vane Type Inlet Devices are designed in such a way to ensure that the feed is entering the vessel in an ideal manner. When a fluid stream strikes a solid surface, it reduces its momentum by exerting a force on that surface, and an equal but opposite force is exerted on itself. If this force is too great, liquid shatter can occur when the surface tension forces of the liquid are overcome. In order to avoid liquid shatter, different types of inlet devices have been developed which can reduce the momentum.

Benefits

●  Pre-separation of bulk liquid

●  Uniform distribution towards downstream equipment

●  Minimizes liquid entrainment from sump

●  Minimizes droplet scatter

●  Reduction of vessel length

●  Allows for capacity increases through existing inlet nozzles

Wire Mesh Coalescers

Wire Mesh Coalescers are used in liquid-liquid separation. They often consist of a combination of wires and fibers in order to create a maximum surface area for droplets to coalesce. In many cases the wire and fiber are from a different construction material, where one is hydrophilic (e.g. metal) and the other is hydrophobic (e.g. polyester) which enhances the separation. Studies have shown that there is an increased coalescence effect at the junction point between both materials. Therefore using both the metal and plastic materials will increase coalescing efficiency significantly.

Plate Packs

Plate packs are used in liquid-liquid separation. They are manufactured as a series of parallel or corrugated plates, designed to enhance the gravity separation as much as possible. The parallel plate packs are ideal in fouling circumstances but have a slightly lower efficiency compared to corrugated plate packs. Various plate spacings can be used in combination with variation in the vane angle in order to cope with various flow conditions.

OUR SERVICES

Omega Separations is one of the few companies worldwide only focusing on gas-liquid and liquid-liquid separation technology.  With our team of highly experienced separation specialist we are able to offer you the best solution for your existing problems or an affordable and competitive replacement of your existing equipment.

As a pure separation company, Omega Separations offers the following services:

Supply of specialized separation equipment 

Our separators include at the present time; wire mesh mist eliminators, vane packs, gas inlet systems, coalescer pads,…

Shut Down Delivery Service

Because of its local presence, Omega Separations can handle the shortest deadlines and can help with urgent replacement or repair of separators.

Specialists in Engineering Services and Optimization of Performance 

Professional technical advice and custom-made equipment designs, with the backup of long time experience, assure that we can handle a wide variety of separation problems mainly related to:

●  Changes in process conditions

●  De-bottlenecking

●  Sub-optimal equipment layout

●  Feasibility studies

●  Process design

showcase of Our Products

Request For Quotation? Extra information needed?

Do not hesitate to contact us, we will be glad to answer you as soon as possible.

Omega Separations bvba

Wijnegembaan 2, Unit 4

2900 Schoten

Belgium

 

Tel +32 3 644 58 00

Fax +32 3 644 57 00

E-mail info@omegaseparations.be


www.omegaseparations.be

OMEGA SEPARATIONS, based in Belgium (Antwerp area), is specialized in the design and the fabrication of internals used in gas-liquid separation and liquid-liquid separation.


Our internals are mist eliminators like wire mesh, mesh pad, Demister, knitted mesh, vane-pack, vane type inlet device, liquid distribution baffle, plate pack, coalescer pad.


From Belgium, we offer a complete customer service: engineering service (process & mechanical design, drawings,…), commercial service, production and shipping.


For rush delivery, we are able to fabricate Wire Mesh Pad in a couple of days.


We are certified NBN EN ISO 9001:2015

OMEGA SEPARATIONS

OUR PRODUCTS

Wire Mesh Mist Eliminators

(mesh pad, Demister, knitted mesh)

Wire Mesh Mist Eliminators are internals used in gas-liquid separation. 


They are made from knitted wire with specific characteristics in order to optimize the efficiency, the pressure drop and dimensions.


They are available in almost any size or shape and can be manufactured in a broad range of metals or plastics or both (co-knitted).

Benefits

●  High collection efficiency

●  Low installed cost

●  Low pressure drop

●  Fast delivery and service

Vane Pack Mist Eliminators

Vane Pack Mist Eliminators are internals used in gas-liquid separation and sometimes as pre-separators when solids or sticky and viscous liquids are present in the flow. They are assembled as banks of parallel van profiles.


They are available in a wide range of Vane Packs depending on the direction of gas flow and the complexity of the vane profiles.

Benefits

●  Suitable for both vertical and horizontal gas flow

●  Good collection efficiency in low pressure drop and vacuum applications

●  Suitable for higher liquid and gas loads

●  Suitable for applications with a significant risk of fouling and/or plugging.

Vane Type Inlet Devices

Vane Type Inlet Devices are designed in such a way to ensure that the feed is entering the vessel in an ideal manner. When a fluid stream strikes a solid surface, it reduces its momentum by exerting a force on that surface, and an equal but opposite force is exerted on itself. If this force is too great, liquid shatter can occur when the surface tension forces of the liquid are overcome. In order to avoid liquid shatter, different types of inlet devices have been developed which can reduce the momentum.

Benefits

●  Pre-separation of bulk liquid

●  Uniform distribution towards downstream equipment

●  Minimizes liquid entrainment from sump

●  Minimizes droplet scatter

●  Reduction of vessel length

●  Allows for capacity increases through existing inlet nozzles

Wire Mesh Coalescers

Wire Mesh Coalescers are used in liquid-liquid separation. They often consist of a combination of wires and fibers in order to create a maximum surface area for droplets to coalesce. In many cases the wire and fiber are from a different construction material, where one is hydrophilic (e.g. metal) and the other is hydrophobic (e.g. polyester) which enhances the separation. Studies have shown that there is an increased coalescence effect at the junction point between both materials. Therefore using both the metal and plastic materials will increase coalescing efficiency significantly.

Plate Packs

Plate packs are used in liquid-liquid separation. They are manufactured as a series of parallel or corrugated plates, designed to enhance the gravity separation as much as possible. The parallel plate packs are ideal in fouling circumstances but have a slightly lower efficiency compared to corrugated plate packs. Various plate spacings can be used in combination with variation in the vane angle in order to cope with various flow conditions.

OUR SERVICES

Omega Separations is one of the few companies worldwide only focusing on gas-liquid and liquid-liquid separation technology.  With our team of highly experienced separation specialist we are able to offer you the best solution for your existing problems or an affordable and competitive replacement of your existing equipment.

As a pure separation company, Omega Separations offers the following services:

Supply of specialized separation equipment 

Our separators include at the present time; wire mesh mist eliminators, vane packs, gas inlet systems, coalescer pads,…

Shut Down Delivery Service

Because of its local presence, Omega Separations can handle the shortest deadlines and can help with urgent replacement or repair of separators.

Specialists in Engineering Services and Optimization of Performance 

Professional technical advice and custom-made equipment designs, with the backup of long time experience, assure that we can handle a wide variety of separation problems mainly related to:

●  Changes in process conditions

●  De-bottlenecking

●  Sub-optimal equipment layout

●  Feasibility studies

●  Process design

showcase of Our Products

Request For Quotation? Extra information needed?

Do not hesitate to contact us, we will be glad to answer you as soon as possible.

Omega Separations bvba

Wijnegembaan 2, Unit 4

2900 Schoten

Belgium

 

Tel +32 3 644 58 00

Fax +32 3 644 57 00

E-mail info@omegaseparations.be


www.omegaseparations.be